BJVJM - 21435 SILICONE RUBBER ADHESIVE SEALANT
- MSDS: BJVJM
- Manufacturer: BOWMAN DISTRIBUTION BARNES GROUP INC
- Product Name: 21435 SILICONE RUBBER ADHESIVE SEALANT
- National Stock Number: 8030-00F014518
Product Identification
Product ID:21435 SILICONE RUBBER ADHESIVE SEALANT
MSDS Date:10/18/1988
FSC:8030
NIIN:00F014518
MSDS Number: BJVJM
Responsible Party
CLEVELAND, OH 44103
Emergency Phone: (216) 391-7200
Info Phone: (216) 391-7200
Cage: 05575
Contractor
Telephone: (216) 391-7200
Cage: 05575
Ingredients
ACETOXYSILANE
Fraction By Weight: 5%/WT
OSHA PEL 10 PPM
ACGIH TLV: 5 PPM
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN/EYE/INHALATION/INGESTION:
IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN/EYE/INHALATION/INGESTION: IRRITATION.
First Aid
First Aid:EYES: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINS. SKIN:
WIPE OFF & FLUSH W/WATER. INHALATION: REMOVE TO FRESH AIR.
INGESTION: OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:OC
Flash Point:>250F
Extinguishing Media:WATER, WATERFOG, CO2, DRY CHEMICAL, & FOAM.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS & FULL
PROTECTIVE CLOTHING.
Accidental Release
Spill Release Procedures:REMOVE PRODUCT & USE ABSORBENT MATERIAL TO
TAKE CARE OF ANY OIL-LIKE RESIDUES.
Handling
Handling and Storage Precautions:STORE <90F. USE REASONABLE CARE &
CAUTION. AVOID EXPOSURE TO CHEMICALS.
Exposure Controls
Respiratory Protection:USE AN ACID GAS/ORGANIC VAPOR RESPIRATOR.
Ventilation:MECHANICAL: RECOMMENDED
Protective Gloves:RUBBER, PLASTIC
Eye Protection:SAFETY GLASSES
Other Protective Equipment:AS REQUIRED
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:300F
Vapor Pres:5
Spec Gravity:1.05
Evaporation Rate & Reference:(ETHER = 1): <1
Solubility in Water:<0.1%
Appearance and Odor:ACETIC ACID-LIKE PASTE, CLEAR IN COLOR.
Percent Volatiles by Volume:<5%
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIAL
Stability Condition to Avoid:EXPOSURE, TEMPERATURES >90F, AIR, &
MOISTURE.
Hazardous Decomposition Products:SILICON DIOXIDE, CO2, & TRACES OF
INCOMPLETELY BURNED CARBON PRODUCTS, & ACETIC ACID VAPORS
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.